|
Mounting Feeder to Feed Container
Spinpro feeders can be mounted to any size container from a 5-gallon plastic pail to a 55-gallon steel drum.
If mounting the feeder to a large container, MAKE SURE you have a safe and secure means to hoist and hold the
feed container in place. Each gallon of shelled corn weighs app. 6-1/2 pounds, so a full 55-gallon drum will
weigh about 400 pounds. To mount the feeder to the feed container, simply follow these four steps:
Place the template supplied with the instruction in the center of the feed container.
Drill four (4) mounting holes as shown on the template using a 3/16" or 7/32" drill.
The larger 7/32" holes allow for some error in alignment between holes.
Drill a 2-1/2" to 3" hole in the center of the container as shown on the template.
Secure the feeder to the feed container using the four #10-32 screws and lock nuts provided.
It may take two people to tighten these screws if a large container is used.
|
